EVS XT-3 Bedienungsanleitung Seite 65

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 94
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 64
XT3 Series DISK RECORDER - Version 10.05 - Software Technical Reference Manual
Issue
10.05.D
EVS Broadcast Equipment SA July 2011
57
Restarting
If the Multicam is restarted without the RAID being rebuilt, the following message
is displayed during the Bootwins:
if a spare disk is OK:
[ Bad ] SEAGATE ST9300603SS 3SE10H1J 0006 279GB 02 07
if no spare disk is OK and the RAID is no more complete:
[ Bad ] SEAGATE ST9300603SS 3SE10H1J 0006 279GB 02 07
WARNING !!! Tray XX is missing 1 disk(s) to be complete
Then when entering the Multicam, another message appears, even if a spare disk
is available:
if the faulty disk is a spare disk:
"Warning: a spare disk has been disconnected. The
system will operate normally on the remaining disks.
At the next opportunity please consider replacing
the faulty disk. It can be identified in the Shift-
F5 screen or in the EVS - RAID configuration menu.
[Enter]=Continue"
if the faulty disk is contained in a RAID:
"Warning: a disk has been disconnected. The system
will operate normally on the remaining disks. At the
next opportunity please consider replacing the
faulty disk. It can be identified in the Shift-F5
screen or in the EVS - RAID configuration menu.
[Enter]=Continue"
The operator can press ENTER and operate normally on 4 disks (configuration
“4+1”) or on 5 disks (configuration “5+1”) or exit the software and return to
EVS menu to run a Hardware Check.
Seitenansicht 64
1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 93 94

Kommentare zu diesen Handbüchern

Keine Kommentare