EVS XT-3 Bedienungsanleitung PDF herunterladen (Seite 60)

Issue

10.05.D

XT33 Series DISK RECORDER – Version 10.05 - Software Technical Reference

EVS Broadcast Equipment SA – July 2011

Important note 1:

The SD phase is always adjusted according to the SDI outputs. Internal

CVBS outputs have a delay of 48 x 37

nsec compared to the

corresponding SDI outputs.

Important note 2:

The internal CVBS outputs cannot be used to feed directly a vision mixer

or any equipment performing video effects, since the phase of the chroma

subcarrier is not adjustable internally.

1.5.8 DEFAULT APPLICATION

This option is used to define the default application that is automatically started

by the system. Every time the EVS software is entered, the default application is

started a few seconds later. You can avoid the automatic start by pressing the

<SPACE BAR> or the UP ARROW and DOWN ARROW keys immediately when

entering the EVS software. If no default application has been defined, the system

will remain in the EVS software.

The default application is shown against a black background in the Application

window.

HOW TO DEFINE A DEFAULT APPLICATION

• In the Application window, select the new default application using the

UP ARROW and DOWN ARROW keys and press F7

OR:

• Call the Maintenance menu with F9 and select ‘Default Application’, select the

defined application from the list, and press ENTER

o If a default application was already defined, a message warns the operator

that it will be disabled. The command can be confirmed with ENTER or

cancelled with ESC.

o If the command is confirmed, another message warns the operator that a

new default application has just been defined.

HOW TO REMOVE THE DEFAULT APPLICATION

• In the Application window, select the application that is the current default

application (blue characters with black background) using the UP ARROW and

DOWN ARROW keys, and press F7.

OR:

• Call the Maintenance menu with F9 and select ‘Default Application‘. Then

select the current default application from the list and press ENTER.

A message warns the operator that the current default application will be

disabled. The command can be confirmed with ENTER or cancelled with ESC.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 93 94

Keine Kommentare

EVS XT-3 Bedienungsanleitung Seite 60