EVS XT2+ Bedienungsanleitung PDF herunterladen (Seite 60)

Issue

10.05.A

XT2 Series DISK RECORDER – Version 10.05 - Software Technical Reference

EVS Broadcast Equipment SA – Jluly 2011

2. Bootwins & Error

Messages

2.1 INTRODUCTION

This section of the manual describes:

• the sequences of the system initialization and the errors that might occur

during this process.

These different error messages will allow the EVS engineers to identify quickly

the reason of a hardware problem and to provide the operator with a relevant

solution.

• the tool, called EVS Disk Doctor, which makes it possible to recover the disk

data in case Multicam would not succeed in reading it when the application is

started.

2.2 INITIALIZING THE DISKS

The system initializes the disks one by one and the following messages are

displayed as the process is going on:

Tray Vendor Model Serial Rev.Cap.Enc.At.

[ Bad ] SEAGATE ST9300603SS 3SE10H1J 0006 279GB 02 07

<05-02> SEAGATE ST9300603SS 3SE10HCH 0006 279GB 02 08

<05-03> SEAGATE ST9300603SS 3SE10GWL 0006 279GB 02 09

<05-04> SEAGATE ST9300603SS 3SE10J2X 0006 279GB 02 10

<05-05> SEAGATE ST9300603SS 3SE10FQ1 0006 279GB 02 11

<05-01> SEAGATE ST9300603SS 3SE10HPD 0006 279GB 02 12

here:

[ Bad ] represents a disconnected disk

<05-01> is used for disk 1 of RAID 5.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 84 85

Keine Kommentare

EVS XT2+ Bedienungsanleitung Seite 60