EVS XT2+ Bedienungsanleitung PDF herunterladen (Seite 79)

XT2+ Series DISK RECORDER - Version 10.05 - Hardware Technical Reference Manual

Issue

10.05.A

EVS Broadcast Equipment SA – July 2011

LEDS ON INTERNAL ARRAY

LEDs 1 to 6 are used in case of one internal array of 6 disks.

LEDs 7 to 12 are used for the upper series of disks in case of one internal array of

2x6 disks.

LEDs correspond to the disks as schematized as followed:

upper 7 12

lower 1 6

upper 8 9 10 11

lower 2 3 4 5

Disk LEDs

off the corresponding disk is not started (not spinning)

on, fast blinking

(green)

the corresponding disk is starting (spinning)

on, steady (green) the corresponding disk is started and used in the RAID

array

on, slowly blinking

(green)

the corresponding disk is started but not used in the RAID

array

STS

on (green) when RCTL RAID controller is properly booted.

ERR

lights red when errors occur during the data transfer between the RAID

controller and the disks

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 85 86 87

Keine Kommentare

EVS XT2+ Bedienungsanleitung Seite 79