EVS XT-3 Bedienungsanleitung Seite 103

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 105
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 102
In standard configuration only Remote one (on RS422 port 1) is allowed to reset the
system.
Warning
This jumper should be removed if the device connected to the RS422 port is NOT
an EVS controller. Maximum voltage on pin 5 of an RS422 port of the server
should not exceed 5 Volt when the corresponding jumper is engaged. Applying a
higher voltage on pin 5 when the corresponding jumper is engaged will result in
permanent electronic damage to the board.
XT3 Server- Version 11.01- Hardware Technical Reference Manual
6. Boards Description 93
Seitenansicht 102
1 2 ... 98 99 100 101 102 103 104 105

Kommentare zu diesen Handbüchern

Keine Kommentare