Evs XT3 Version 11.00 Configuration Manual Bedienungsanleitung PDF herunterladen (Seite 144)

Speed

Description Enables the selection of the SDTI option and the bandwidth for

the network.

On theXT3 server, there is one pair of SDTI connectors:

XNet2 Non-Relay connectors are used at 1485 Mbps.

The SDTI circuit is closed only when the Multicam software is

started.

Values No Relay 1485 (Mbps) / Off

Net Name

Description Machine name on the SDTI network.

It is not mandatory because a network number is assigned to

the EVS server. It is however recommended to easily identify

all servers connected to the XNet network.

The Net Name will be displayed even if the SDTI code is not

valid.

Values The Net Name is user-defined and cannot exceed 8

characters.

Default Values By default, no Net Name is assigned.

Net Number

Description The Net Number parameter defines the machine number on

the network. This number is user-defined and must be unique

for each system on the network. When entering a new number

if this number is already assigned to another machine, an error

message will warn the user.

Values Range between 1 and 29

Default 1

XT3 Server-Version 11.00-Configuration Manual

3. Multicam Configuration 138

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 226 227

Keine Kommentare

Evs XT3 Version 11.00 Configuration Manual Bedienungsanleitung Seite 144